The Process of Paving an Asphalt Road

There are many different steps involved with paving asphalt roads, parking lots, and driveways. While it is never too late to learn new things, it is important that you learn the right way to do certain things. Also, you always want to trust the professionals in asphalt paving in Dallas Fort Worth, TX to perform these jobs. These are some of the steps involved in the asphalt paving process.

Demolition

When you are preparing to pave asphalt, you need to clear the existing surface. This will require some demolition and removal work. The way you clear the land is with heavy machinery to remove surfaces such as concrete, asphalt, gravel, or even dirt. Once demolition is done, remove the debris and continue on to the next step.

Grading & Sloping

Grading and sloping of the surface you intend to pave will allow the water to run off in appropriate areas. Making sure the water drainage from your asphalt surface is vital to its longevity. This will lead to the subbase. This is actually the most important aspect of the process. It will provide a stable surface for the newly paved asphalt. The subbase also acts as a frost barrier. Make sure that you pay special attention to stability, compaction, and thickness of the base.

Binder

After you have the subbase laid, you want to make sure you identify and repair any soft spots. Once this is done, you will need to add the binder. This is a large aggregate that is mixed with oil. It is durable and very strong. This will act as a strength for the new surface.

Install The Asphalt

Now that you are done with all of the supportive structures, it is time for the top layer of asphalt to be freshly added. This surface is made up of tiny aggregates, oil, and sand. The combination of these materials will offer a smooth ride and will look clean with a jet-black shine. The surface will be attractive when installed correctly.

Transition and Joints

Lastly, but something to consider from the beginning, your asphalt surface will likely connect with an existing one. Whether it is connecting to a driveway, road, parking lot, or other surface, there is a transition you have to take into account. Make sure you are using butt joints where the old surface and new surface meet. You will have to give special attention to the transition areas.

Ensure Proper Water Run-Off

Make sure that you are using appropriate water run-off and grading for your asphalt surface. Water will cause many cracks, potholes, and other damage over time. Addressing this issue when laying your asphalt surface will save you a major headache in the future.

If you are looking to pave an asphalt surface for your business or home, you will want to trust the professionals in asphalt paving in Dallas Fort Worth, TX. Contact M Carroll Blacktop to get a free quote for your paving job today.