Sealcoating your driveway is a valuable and verified way to prolong its life. Sealcoating produces an extra defensive layer over your pavement that discourages water from intruding into cracks and forming potholes, which can be expensive to repair. Nevertheless, in order to guarantee the best results and appreciate the real advantages of sealcoating, you need to confirm you have it done at the right moment.
It is crucial for you to know when you should apply sealcoating. Sealcoating must be completed when your asphalt pavement shows indications of wear and tear, such as:
Sealcoating ought to be spread when the temperature is over 50 degrees Fahrenheit. Hotter temperatures are more suitable for spreading a protective layer than cooler ones (particularly when it comes to asphalt). The optimal time of day for sealcoating is the early hours when it is sunny and sizzling. Even though you can do sealcoating at any time of day, it is essential to mention that the warmth helps the sealant dry quickly for the best results.
Summer is the most suitable time to sealcoat your driveway. This is because from June to August, and often September when the days are warmer, sealcoating will endure longer and remain more flexible. You can sealcoat in different months, but you must confirm that the temperature does not fall below 50 degrees and that no precipitation is predicted in the coming 24 hours. However, when it comes to drying, little can surpass the sunshiny days of summer.
If you have established a brand-new asphalt pavement, you should delay at least six months before sealcoating to let the asphalt cure properly. Then, for subsequent maintenance, you should sealcoat every two to three years. Proper sealcoating will safeguard and prolong the life of your driveway, discourage oxidation due to UV rays, and beautify the pavement.
If precipitation is predicted, it's best to bypass sealcoating. Sealcoating must always be spread on a dry surface. A better alternative would be for you to review the forecast and delay for a while until there is no precipitation predicted for at least a few days. You must also bypass sealcoating if the temperature is below 50 degrees or predicted to go below 50 degrees in the coming 24 hours. Sealcoating will not efficiently stick and bond to the surface under 50 degrees. Applying sealer when it's too frigid can induce curling, peeling, or flaking of sealer.
And ultimately, the very best time to start the seal coating process is when you discover the right contractor for the project. Don't endanger your property or your finances with an amateur!
If you are looking for an experienced, reliable, and well-equipped contractor for your sealcoating project, look no further than our experts on asphalt paving, repairs, and sealcoating in Lodi, CA. We offer prompt service with timely scheduling alternatives, so there is no excuse to neglect looking after your pavement. Contact us today for a free quote and learn more about our professional sealcoating services.