4 Tips for Asphalt Parking Lot Aftercare

4 Tips for Asphalt Parking Lot Aftercare

4 Tips for Asphalt Parking Lot Aftercare

It is hard to beat the satisfaction of a newly paved asphalt parking area. Newly installed asphalt is a welcoming sight that gives a modern, stunning, fresh look to any parking area. If you care for your asphalt investment, you can keep the functionality and appeal for up to three decades. However, if you neglect regular care, it may only last up to seven years.

Asphalt is one of the most reliable and valuable pavement materials on the market. Still, to ensure that it stays functional and attractive for the longest time possible, it must be protected from hazardous elements and maintained regularly. Out experts on asphalt paving in Angels Camp, CA, offer these considerations for asphalt parking lot aftercare.

Allow curing time for new paving

Asphalt can be used immediately after drying, around 24 hours after pouring. But it would be best if you kept in mind that your asphalt surface does not have the maximum damage resistance and strength until it has cured completely, which takes about 12 months. Parking lots are functional during curing, but taking certain precautions to avoid abuse and harsh use will benefit their lives. For the first year following asphalt installation, you should monitor and restrict vehicles' weight, be aware of how long cars park in one space, and encourage users to drive slowly and sensibly. These tips will give your pavement plenty of time to cure correctly without untimely damage.

Clean fuel, oil, and other fluid leaks immediately

Not many things will damage new asphalt irreparably, but fuel, oil, and other fluid leaks can. These materials will deteriorate the chemicals that bind asphalt together. Even worse, this can happen rapidly, threatening the structural integrity of your asphalt investment. Chemical intrusion of the pavement surface can lead to raveling or worse issues that will deteriorate your pavement, causing extensive and costly avoidable repairs. Be sure to avoid these problems by addressing fluid leaks as soon as you notice them.

If gasoline, oil, or other fluids have spilled on your pavement, absorb as much of the spill as possible with no-clump cat litter or sawdust. Then remove the absorbent materials and responsibly dispose of them. Next, use a hose to wash away the remaining debris from the soiled area. Do not use a pressure washer because the goal is to remove loose material. Then use dish soap and water, a tri-sodium phosphate (TSP) paste, or a commercial degreaser to scrub the area well. Be sure to avoid solvent-based chemicals during clean-up that may cause more damage to your pavement than the opposing fluid leaks. In addition, you should always protect your eyes and skin during clean-up efforts. Finally, rinse the area thoroughly with clean water and let it dry.

Slow down

Speed can demolish freshly installed asphalt. Take extra time entering your newly paved parking area to avoid scarring or scuffing the asphalt surface. Moving at a slow pace will prevent damage. If your asphalt is open to public use, you should implement measures to encourage speed reduction to avoid unnecessary damage to your investment.

Sealcoat your pavement as directed

Once your pavement has cured fully, it is essential to apply quality sealcoating protection. Sealcoating prevents moisture intrusion, fading, and other hazardous elements. After your initial sealcoating service, you should have paving professionals reapply it every two to three years.

Follow these tips to ensure you are caring for your pavement investment. Then, when you need asphalt paving in Angels Camp, CA, call M. Carroll Black Top Service. We have the experience and expertise to get every job done right every time. Contact us today!

To Top