4 Elements That Can Harm Your Asphalt Surfaces

4 Elements That Can Harm Your Asphalt Surfaces

4 Elements That Can Harm Your Asphalt Surfaces

If you have recently paved a parking lot, sidewalk, or driveway, you are likely aware of the attractive, durable, and low maintenance benefits of asphalt paving. There are few challenges to asphalt surfaces, though proper protection and timely repairs can extend the life of asphalt pavement and keep it looking beautiful for decades. With that in mind, certain elements can damage your asphalt surfaces. Our experts on asphalt paving in Rio Vista, CA, can assist you with protecting your asphalt from dangerous elements and normal wear and tear to keep it in optimal condition for years to come. They offer the following information on common factors that can harm your asphalt surface when not adequately addressed.

Gasoline and other fluid leaks

Failing to clean up fuel or oil spills on your asphalt surface for long periods can cause the softening and deterioration of your pavement. In addition, sealcoating over these contaminants will result in the protective layer not adhering to the structure's surface. Therefore, it is vital to address gasoline and other fluid leaks quickly to avoid the danger of premature deterioration that can compromise the structural integrity of your pavement.

Water

Water pooling on your asphalt surface will lead to cracking. Cracks in the asphalt allow water intrusion into the deeper layers of the structure, compromising the structural integrity. Gaps left unrepaired will eventually lead to potholes, posing safety risks for people walking or driving on them. Sealcoating your asphalt surface provides a protective layer on the structure that resists water intrusion and damage. It allows water to roll off the paved surface instead of seeping into the deeper layers.

Sunlight

UV rays from the light of the sun can damage asphalt, just as they damage a person's skin. Without proper surface protection, the sun's rays can cause asphalt to dry out and crack easily. Again, cracking can cause further issues like water intrusion and potholes that will eventually compromise the structural integrity of your asphalt pavement. Sealcoating your pavement will protect the surface from the sun's harmful rays and keep it looking new.

Heavy Traffic

Heavy traffic can negatively impact your asphalt, especially when it is exposed to weighty trucks and vehicles. High levels of pressure and weight on an asphalt pavement will lead to ruts and further deterioration. These ruts make it easy for water to remain on your asphalt pavement, leading to water intrusion, cracks, and potholes. This can eventually degrade your surface’s durability and even lead to premature asphalt replacement. It can be helpful to encourage heavy vehicles not to use your paved surfaces or move off of them as quickly as possible. Avoiding heavy traffic or keeping it moving through the area will reduce the risk of ruts and deterioration.

These are just a few of the elements that can harm your asphalt driveway or parking lot. Sealcoating your asphalt pavement within a year of installation and every 2 to 3 years after can go a long way toward protecting the surface from damaging elements. Contact us today for further information on asphalt paving in Rio Vista, CA.

To Top