3 Ways to Extend the Life of Your Asphalt Surfaces

3 Ways to Extend the Life of Your Asphalt Surfaces

3 Ways to Extend the Life of Your Asphalt Surfaces

If you have asphalt surfaces around your property, keeping them in optimal condition and extending their life is probably an essential priority. Asphalt can become unsafe for pedestrians and drivers when it is not correctly maintained and cared for. On the other hand, when proper maintenance and repairs are performed promptly, asphalt can last for up to 30 years without resurfacing or repaving. Our experts on sealcoating in Salida, CA, offer the following ways you can extend the life of your asphalt surfaces.

Sweeping and pressure washing your asphalt

Sweeping asphalt surfaces is an easy way to maintain them. Nearly anyone can manage to sweep away debris and dirt to keep contaminants from sitting on the surface for extended periods. When you sweep your asphalt surfaces regularly, you remove ant dirt or grit that can accumulate on the surface and eventually find its way into potholes and cracks that may develop.

Pressure washing is another easy maintenance task. Pressure washing your pavement will remove dirt, debris, and fluid leaks from the surface of your asphalt. Pressure washing will also help determine if you have any asphalt drainage problems. Simply explore your freshly washed surface for any areas of standing water that signal poor drainage. If you encounter any areas that retain moisture, you will want to reach out to an asphalt contractor right away to avoid potential problems. Finally, pressure washing your asphalt prepares it for repair and maintenance services. You should never perform repairs and sealcoating on dirty asphalt. Remember to pressure wash the surface 24 to 48 hours before these services to ensure that the surface has plenty of time to dry.

Asphalt repairs

Repairing any damages to your asphalt surface is vital for maintaining your pavement. When you notice cracks or potholes, you should proceed with repairs as soon as possible to prevent them from becoming worse. Gaps under 1/8 of an inch can be left alone, as you can apply sealcoating directly over them. On the other hand, you should fill cracks beyond 1/8 of an inch with crack filler to avoid water intrusion and further damage. Potholes should be repaired by asphalt professionals to ensure repairs are done correctly and to avoid damaging your asphalt surface's structural integrity. All repairs need to be taken care of before you can apply sealcoating.


Sealcoating is a protective layer spread over an asphalt surface that can resist damages from UV rays, water intrusion, fluid leaks, and much more. You should complete sealcoating services within a year of installation and every 2 to 3 years after, depending on condition. Asphalt sealing will extend pavement life and help you avoid the need for costly repairs.

Maintaining your asphalt appropriately will ensure that you get the most extended life possible from your investment. Failing to do so may lead to extensive damages and costly repairs. These are a few of the ways you can extend the life of your asphalt paving. Contact us today for more information on sealcoating in Salida, CA.

To Top