Asphalt roads are solid and durable, but they have a few enemies that will destroy their integrity. If you want to make sure that your asphalt paving stays in its best condition and does not need to be repaved for as long as possible, make sure to avoid exposing it to these few enemies.
Standing water will destroy asphalt paving. Most roads are sloped to the side to avoid a buildup of excess on roads, but it is extremely important to keep them clear of any possible water. When water begins to collect and build up in puddles on the asphalt paving, it will eat away at the rock and create cracks through the pavement. Make sure that you properly watch and maintain your asphalt paving, providing it with proper drainage to keep water from building up on the road.
While asphalt paving in Austin, TX is strong, large machinery is stronger. You need to make sure that you keep large trucks and machinery away from your asphalt paving so that it doesn’t crack under the pressure of the several thousand-pound vehicles. These vehicles are extremely heavy and will quickly break the asphalt pavement up as they drive over it. Make sure that you maintain your asphalt paving and keep heavy vehicles off it. Many cities do not have asphalt paving capable of supporting large trucks, so it is important to take care of the pavement and keep these trucks off it.
Oil has several chemicals that will quickly eat through the chemical bonds that hold your asphalt paving together. If you want to ensure that it stays together and in top condition, make sure to clean up any oil spills that happen on your asphalt paving. You will quickly notice areas that have been exposed to oil, as they will sink into the ground and crumble away. Make sure to properly seal your pavement and to quickly clean up any oil that you can when you notice it on your pavement. Oil can be a nightmare to deal with after it starts eating through your roads, causing potholes and cracks that will quickly take over your road.
This one is hard to avoid, but sunlight can damage your asphalt paving. The heat and radiation that the asphalt paving absorbs will heat the road to an extremely high temperature and quickly break it apart. If possible, make sure to pave your asphalt in shaded areas, allowing your asphalt paving to cool down from time to time and have shelter from the hot sun’s radiation. It is important to keep your road protected, or it will quickly fall apart.
If you want to make sure that your asphalt paving stays in its best condition for the longest amount of time, make sure to avoid these enemies of asphalt paving in Austin, TX. They will quickly eat through your asphalt and destroy your pavement. Contact us for your asphalt inspection today.