Driveway Sealcoating in Dallas Forth Worth, TX
Properly sealcoating your asphalt driveway will protect it from hazardous fluid leaks like gasoline, oil, coolant, and power steering fluid. It will also protect your driveway’s surface from the sun’s UV rays, ice, rain, and snow.
Sealcoating benefits
Sealcoating your driveway regularly can extend its life and improve curb appeal by making the asphalt look fresh and new. The process also helps avoid costly future repairs because it is designed to maintain your asphalt’s integrity and protect it from weather elements. In addition, sealcoating your asphalt driveway will protect it from damages that can pose a safety risk for your visitors and reduce the chances of damaging your vehicles.
Sealcoating your asphalt drive has numerous other benefits, too. A properly applied sealcoat will stop impending weather damage caused by water, ice, and snow intrusion. The newly applied sealant will cause water to run off the asphalt instead of penetrating the deeper levels of asphalt surfaces. Sealcoating also protects your driveway surface from the sun’s dangerous UV rays, slowing the oxidation process and fading on the asphalt surface.
High-quality, properly applied sealcoating on your driveway will protect the surface from damage caused by vehicle fluid leaks, weather damage caused by water intrusion from rain, ice, and snow that often leads to the development of cracks and potholes.
Monitoring for asphalt damage
Though sealcoating protects your driveway from future damages, asphalt damage is rarely wholly avoided. Therefore, it is crucial to inspect your drive for damages often so you can repair them before more costly repair work is required. If you find cracks in your driveway, you should use a crack sealer to fill and restore them at least once a year. Sealcoating is only recommended once every two to three years, so crack filling in between will help extend the life of your asphalt drive.
Sealcoating process
Sealcoating is best left to a professional paving company to ensure the best possible results and extend the life of your driveway. The process of sealcoating involves numerous steps to provide the highest quality service possible. Experts offer these steps for proper sealcoating in Dallas Forth Worth, TX:
- Weather monitoring
Professional asphalt companies will ensure that the temperature outside will be above 60 degrees Fahrenheit and that there is no moisture or rain expected for a couple of days. - Crack patching
Cracks more extensive than a quarter of an inch require patching before applying the sealcoating. Asphalt paving contractors can handle these repairs quickly and easily. - Surface prep
Sweeping away debris from the asphalt that needs sealing and spraying away the dust with water will ensure a clean surface to sealcoat. - Stain removal
Spots and stains on your driveway from vehicle fluid leaks will be cleaned with commercial strength detergents, then washed away with clean water. - Dry time
Allowing the surface to dry completely before asphalt sealing is vital for proper installation. Depending on the ambient temperature, drying will take about an hour, and professionals will never rush the process. - Mixing it up
Sealcoating professionals will thoroughly mix the sealant materials before application. - Pour it on
Spreading and pouring of the sealant are typically done in sections of around 20 square feet. Then, Sealcoating is applied in thin, overlapping coats to ensure proper curing and drying. - Off Limits
After the sealcoating process has been completed, it is recommended to avoid foot or vehicle traffic for 24 to 48 hours to guarantee that the sealcoat has adequately dried.
Working with a licensed and insured professional paving company that holds itself to the highest industry standards for equipment, materials, and safety practices will give you the peace of mind that your paving project has been completed appropriately and safely.
Contact us today for more information on all of your asphalt paving needs. We have the expertise and experience to guarantee your satisfaction with every project we complete.